Hornby Sentinel 0-6-0 sound fitting.
Another
straight forward conversion first remove the 4 body fixing screws, the body
just pulls away mine was a little tight. I trimmed the orange and white wires again sealing the end
with a short length of heat shrink tube.
This time I chose the Zimo MS500N sound chip and a Microcube 12x8x7 speaker this fits nicely behind the
motor held with double sided tape. Wrapping the chip with 20mm wide Kapton tape. Carefully
position the wrapped chip on top of the motor again secured using Kapton tape, once
again no major surgery to the model.
No comments:
Post a Comment