This is a very straight forward installation; 2 screws long one the front short one to the back hold the body in place. The Zimo MS500N sound chip and a Minnow4 15x8x4.5 speaker from https://www.youchoos.co.uk/ only have the speaker wires (purple) the remaining wires were removed. The Minnow4 slips in-between the gear tower and PCB riser, it is necessary to shorten the pins on the MS500 to 4 millimetres long pin 1 is to the right as you look down it is marked, and wrap the chip with 20 mm Kapton tape other than that it’s plug and play.
No comments:
Post a Comment