Peppercorn A1

After my visit to the Severn Valley Railway last week I brought back a souvenir. Tornado in Brunswick green duly chipped and now running at default values. One minor hiccough was the pin on the tender failed as it happened the only polystyrene rod I did not have was 2.5mm a quick trip to the model shop and all is well.

Remove the rear wheel set and unscrew the 3 retaining screws holding the tender body 

Under the weight there is provision for a speaker

Remove the blanking plug and insert the chip

Fitting sound should be a doddle

That should not be there!

That's that sorted

All that remains is to set the CV's