After my
visit to the Severn Valley Railway last week I brought back a souvenir. Tornado
in Brunswick green duly chipped and now running at default values. One minor hiccough
was the pin on the tender failed as it happened the only polystyrene rod I did not have was 2.5mm a quick trip to the model shop and all is well.
Remove the rear wheel set and unscrew the 3 retaining screws holding the tender body
Under the weight there is provision for a speaker
Remove the blanking plug and insert the chip
Fitting sound should be a doddle
That should not be there!
That's that sorted
All that remains is to set the CV's
