Continuation of the rebuild of “Pacer Set” from Greater Manchester Passenger Transport Executive

 24/12/2021 Motor resembled into drive train and motor and pickup wires soldered to chassis.

25/12/2021 0.5mm pilot holes drilled in light mouldings and divider piece added to stop light bleed. Pilot holes opened to 1mm and top of light box covered. The chassis was test fitted into the body.

27/12/2021 resistors soldered to DCC socket and insulated with colour coded heat shrink micro LED’s threaded into light cluster aperture.

Rebuild of “Pacer Set” from Greater Manchester Passenger Transport Executive

Today 22/12/2021 the decoder socket boards eventually arrived. Square bearers to support the decoder socket board were cut from 4.8mm square evergreen strip. Drilled in the centre for small a self tapping screw. 

Decoder socket board screwed in place and the whole assembly glued to the interior moulding.

Delivery of a “Pacer Set” from Greater Manchester Passenger Transport Executive

Pix Valley is expecting a delivery of a “Pacer Set” 55554 and 55604 from Greater Manchester Passenger Transport Executive in the next few days. Unfortunately Storm Barra has delayed the departure of the convoy. More news when the set arrives at Pix valley. Eventually today 10/12/2021 55554 and 5560 arrived at Pix Valley, they will need stripped cleaned and tested before entering service. 

Overhaul commenced today 11/12/2021 stripped and measured for a decoder socket board 

A pair of a decoder socket boards ordered today 11/12/2021 from Illuminated Models.